CP1000T100

30-Second Fit Check

• Choose CP1000T100 when your charger must tolerate wide AC mains (90–264Vac) while delivering 1000W to a 100V-class pack.
• Best if you want pre-defined LFP/NCM curves (not a blank, user-programmable charger profile).
• 10A max charge current is listed for this model; confirm your pack, connector, and wiring can support the current.
• Supports CAN along with remote voltage sense compensation and a remote ON/OFF function (per datasheet).
• Mechanical check: compact form factor is specified as 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm).
• Compliance planning: confirm the charger’s stated safety/EMC items align with your end-product requirements.

What it is & why it matters

• Single-phase universal input simplifies site installs—no voltage-select switches to manage.
• Reverse-polarity connection detection helps reduce wiring mistakes during service.
• Remote ON/OFF control supports system-level interlocks and sequencing.
• Compact mechanical envelope makes it easier to embed into AGV docks and cabinet builds.

Key Specs

• Output power: 1000W
• Max charge current: 10A
• AC input: Single-phase 90–264Vac (rated 100–240Vac)
• Input frequency: 47–63Hz (rated 50–60Hz)
• Aux output: 12V, 1A max
• Output regulation: <3% (includes line & load regulation)
• Output current ripple: 10% peak-to-peak
• Efficiency: Up to 93% max (48V models, excluding fan power)
• Operating altitude: 5000 m operating altitude
• Dimensions: 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm)
• LFP profile: 32S LiFePO4: FC 115.2V (Vnor 102.4V)
• NCM profile: 27S NCM: FC 113.4V (Vnor 97.2V)

Integration & Controls

• Controls & comms: Remote voltage sense compensation, remote ON/OFF control, CAN communication
• Remote sense: supports remote voltage detection compensation (per datasheet)
• Remote control: remote ON/OFF function specified (per datasheet)
• Thermal management: smart fan speed control specified

Best for / Not for

Best for

• 100V-class packs that match one of the built-in profiles (e.g., 32S LiFePO4; 27S NCM).
• AGV and automation teams that want predictable integration options (CAN + remote control features).
• Programs that want a compact charger footprint with a specified auxiliary 12V/1A output.

Not for

• Battery programs that require a fully user-programmable charge algorithm beyond the built-in curves.
• Packs needing systems that require adjustable high-voltage profiles not covered by the built-in LFP/NCM curves.
• Installations needing three-phase AC input (not specified for this series).

Typical Applications

• robot vacuum charging modules
• medical equipment
• industrial equipment
• linear motor systems

Selection Checklist

• Battery match: confirm chemistry (LFP/NCM), series count, and the required full-charge voltage (FC).
• Current planning: validate pack/BMS current limits against the model’s max current.
• Controls: define whether you’ll use CAN, remote ON/OFF, and remote sense in your architecture.
• AC infrastructure: confirm 90–264Vac single-phase availability at the dock/cabinet.
• Mechanical & cooling: fit the specified dimensions and provide airflow for fan-assisted cooling.
• Altitude & environment: check the 5000 m operating altitude spec vs your deployment conditions.

Compliance, Isolation & Reliability

• Isolation: Medical-grade 2×MOPP isolation; dielectric ratings 4000Vac (primary-to-secondary); 1500Vac (primary-to-earth); 1500Vac (secondary-to-earth)
• Leakage current: Contact leakage current <100µA; earth leakage current <300µA
• Safety: IEC/UL 62368-1 + CAN/CSA 62368-1; IEC/UL 60601-1 + CAN/CSA 60601-1
• EMC: EMC Class B conducted & radiated emissions; meets IEC 60601-1-2 (4th edition)
• Reliability: MTBF > 500k hours