CP1000T48

30-Second Fit Check

• Choose CP1000T48 when your charger must tolerate wide AC mains (90–264Vac) while delivering 1000W to a 48V-class pack.
• Best if you want pre-defined LFP/NCM curves (not a blank, user-programmable charger profile).
• Need up to 20.8A? This model’s max charge current supports higher throughput charging (within your pack’s limits).
• Integration options include CAN communication, remote ON/OFF, and remote voltage sense compensation (per datasheet).
• Space planning: the charger footprint is 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm)—confirm enclosure fit and airflow path.
• Compliance planning: confirm the charger’s stated safety/EMC items align with your end-product requirements.

What it is & why it matters

• Single-phase universal input simplifies site installs—no voltage-select switches to manage.
• Reverse-polarity connection detection helps reduce wiring mistakes during service.
• Remote ON/OFF control supports system-level interlocks and sequencing.
• Compact mechanical envelope makes it easier to embed into AGV docks and cabinet builds.

Key Specs

• Output power: 1000W
• Max charge current: 20.8A
• AC input: Single-phase 90–264Vac (rated 100–240Vac)
• Input frequency: 47–63Hz (rated 50–60Hz)
• Aux output: 12V, 1A max
• Output regulation: <3% (includes line & load regulation)
• Output current ripple: 10% peak-to-peak
• Efficiency: Up to 93% max (48V models, excluding fan power)
• Operating altitude: 5000 m operating altitude
• Dimensions: 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm)
• LFP profile: 15S LiFePO4: FC 54.8V (Vnor 48.0V)
• LFP profile: 16S LiFePO4: FC 58.4V (Vnor 51.2V)
• NCM profile: 13S NCM: FC 54.6V (Vnor 46.8V)
• NCM profile: 14S NCM: FC 58.8V (Vnor 50.4V)

Integration & Controls

• CAN communication: supported (per datasheet) for monitoring/control integration.
• Battery handling: automatic battery connection detection and reverse-polarity detection are specified.
• Charge completion: automatic full-charge stop is specified.
• Cooling: smart fan speed control is specified.

Best for / Not for

Best for

• 48V-class packs that match one of the built-in profiles (e.g., 15S LiFePO4; 16S LiFePO4; 13S NCM; 14S NCM).
• AGV and automation teams that want predictable integration options (CAN + remote control features).
• Programs that want a compact charger footprint with a specified auxiliary 12V/1A output.

Not for

• Battery programs that require a fully user-programmable charge algorithm beyond the built-in curves.
• Packs needing profiles that need 72V-class full-charge voltages (mid‑80V range).
• Installations needing three-phase AC input (not specified for this series).

Typical Applications

• linear motor systems
• AGV charging modules
• medical equipment
• robot vacuum charging modules
• industrial equipment

Selection Checklist

• Profile selection: pick the correct built-in LFP or NCM curve and verify the FC voltage matches your pack.
• Wiring: decide if remote sense is needed to compensate for harness voltage drop.
• Comms: if using CAN, confirm message/command mapping during commissioning.
• Aux power: plan use of the 12V/1A auxiliary output (or leave unused).
• Compliance planning: align the stated safety/EMC items with your product requirements.

Compliance, Isolation & Reliability

• Isolation: Medical-grade 2×MOPP isolation; dielectric ratings 4000Vac (primary-to-secondary); 1500Vac (primary-to-earth); 1500Vac (secondary-to-earth)
• Leakage current: Contact leakage current <100µA; earth leakage current <300µA
• Safety: IEC/UL 62368-1 + CAN/CSA 62368-1; IEC/UL 60601-1 + CAN/CSA 60601-1
• EMC: EMC Class B conducted & radiated emissions; meets IEC 60601-1-2 (4th edition)
• Reliability: MTBF > 500k hours