CP1500T24

30-Second Fit Check

• Match if you need a 1500W charger for a 24V-class lithium pack and your site power is Single-phase 90–264Vac (rated 100–240Vac).
• Charge profiles are built-in for LiFePO4 (LFP) and NCM chemistries—verify your series count and required full-charge voltage.
• Electrical fit check: model max current is 62.5A; size your fuse, wiring, and thermal design accordingly.
• If your controller needs charger status/control, the series supports CAN plus remote-control features (per datasheet).
• Space planning: the charger footprint is 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm)—confirm enclosure fit and airflow path.
• Compliance planning: confirm the charger’s stated safety/EMC items align with your end-product requirements.

What it is & why it matters

• Built-in LFP/NCM curves reduce engineering effort when you’re validating battery profiles.
• CAN communication provides a path for supervisory control and diagnostics.
• Automatic full-charge stop supports hands-off charging behavior in fleet operations.
• Smart fan speed control helps balance cooling needs and noise/power draw (per datasheet).

Key Specs

• Output power: 1500W
• Max charge current: 62.5A
• AC input: Single-phase 90–264Vac (rated 100–240Vac)
• Input frequency: 47–63Hz (rated 50–60Hz)
• Aux output: 12V, 1A max
• Output regulation: <3% (includes line & load regulation)
• Output current ripple: 10% peak-to-peak
• Efficiency: Up to 94% max (48V models, excluding fan power)
• Operating altitude: 5000 m operating altitude
• Dimensions: 5.0" × 8.5" × 1.58" (127.3 × 215.6 × 43 mm)
• LFP profile: 7S LiFePO4: FC 25.2V (Vnor 22.4V)
• NCM profile: 6S NCM: FC 25.2V (Vnor 21.6V)

Integration & Controls

• CAN communication: supported (per datasheet) for monitoring/control integration.
• Battery handling: automatic battery connection detection and reverse-polarity detection are specified.
• Charge completion: automatic full-charge stop is specified.
• Cooling: smart fan speed control is specified.

Best for / Not for

Best for

• 24V-class packs that match one of the built-in profiles (e.g., 7S LiFePO4; 6S NCM).
• AGV and automation teams that want predictable integration options (CAN + remote control features).
• Programs that want a compact charger footprint with a specified auxiliary 12V/1A output.

Not for

• Battery programs that require a fully user-programmable charge algorithm beyond the built-in curves.
• Packs needing profiles requiring ~28.8V/29.4V full-charge (28V-class strings).
• Installations needing three-phase AC input (not specified for this series).

Typical Applications

• industrial equipment
• linear motor systems
• medical equipment
• robot vacuum charging modules
• AGV charging modules

Selection Checklist

• Profile selection: pick the correct built-in LFP or NCM curve and verify the FC voltage matches your pack.
• Wiring: decide if remote sense is needed to compensate for harness voltage drop.
• Comms: if using CAN, confirm message/command mapping during commissioning.
• Aux power: plan use of the 12V/1A auxiliary output (or leave unused).
• Compliance planning: align the stated safety/EMC items with your product requirements.

Compliance, Isolation & Reliability

• Isolation: Medical-grade 2×MOPP isolation; dielectric ratings 4000Vac (primary-to-secondary); 1500Vac (primary-to-earth); 1500Vac (secondary-to-earth)
• Leakage current: Contact leakage current <100µA; earth leakage current <300µA
• Safety: IEC/UL 62368-1 + CAN/CSA 62368-1; EN/UL 60335-1
• EMC: EMC Class B conducted & radiated emissions; meets IEC 60601-1-2 (4th edition)
• Reliability: MTBF > 500k hours